Non-isothermal Cold Crystallization Behavior and Kinetics of Polylactide/Clay Nanocomposites. Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 1100-1113.
作者：Defeng Wu, Liang Wu, Lanfeng Wu, Bin Xu, Ming Zhang.
關鍵字：polylactide; clay; nanocomposites; cold crystallization; kinetics.
論文來源：期刊
具體來源：Journal of Polymer Science Part B: Polymer Physics
發表時間：2007年
Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 1100-1113.
ABSTRACT:
The nonisothermal cold crystallization behavior of intercalated polylactide (PLA)/clay nanocomposites (PLACNs) was studied using differential scanning calorimetry (DSC), polarized optical microscope (POM), X-ray diffractometer (XRD), dynamic mechanical thermal analysis (DMTA) and Fourier Transform Infra-Red Spectrometer (FT-IR). The results show that both the cold crystallization temperature (Tcc) and melting point (Tm) of PLA matrix decreases monotonously with increasing of clay loadings, accompanied by the decreasing degree of crystallinity (Xc%) at the low heating rates ( 5oC/min). However, the Xc% of PLACNs presents a remarkable increase at the high heating rate of 10oC/min in contrast to that of neat PLA. The crystallization kinetics was then analyzed by the Avrami, Jezioney, Ozawa, Mo, Kissinger and Lauritzen-Hoffman kinetic models. It can be concluded that at the low heating rate, the cold crystallization of both the neat PLA and nanocomposites proceeds by regime III kinetics. The nucleation effect of clay promote the crystallization to some extent, while the impeding effect of clay results in the decrease of crystallization rate with increasing of clay loadings. At the high heating rate of 10oC/min, crystallization proceeds mainly by regime II kinetics. Thus the formation of much more incomplete crystals in the PLACNs with high clay loadings due to the dominant multiple nucleations mechanism in regime II, may have primary contribution to the lower crystallization kinetics, also as a result to the higher degree of crystallinity and lower melting point in contrast to that of neat PLA.
PDF DOWNLOAD:
http://www3.interscience.wiley.com/journal/114202214/abstract