作者：* 通訊作者
論文來(lái)源：期刊
發(fā)表時(shí)間：2009年
[1] Shuangyue Sun, Yadong He, Xiaodong Wang*, Dezhen Wu, Modification of recycled polycarbonate with core-shell structured latexes for enhancement of impact resistance and flame retardancy, Journal of Applied Polymer Science, 2010, in press.
[2] Huanzhi Zhang, Xiaodong Wang*, Dezhen Wu, Silica encapsulation of n-octadecane via sol-gel process: A novel microencapsulated phase change material with enhanced thermal conductivity and performance, Journal of Colloid and Interface Science, 2010, in press.
[3] Chunling Xin, Yadong He, Qingchun Li, Yingzhu Huang, Baorui Yan, Xiaodong Wang*, Crystallization behavior and foaming properties of polypropylene containing ultra-high molecular weight polyethylene under supercritical carbon dioxide, Journal of Applied Polymer Science, 2010, in press.
[4] Huanzhi Zhang, Xiaodong Wang*, Synthesis and properties of microencapsulated n-octadecane with polyurea shells containing different soft segments for heat energy storage and thermal regulation, Solar Energy Materials and Solar Cells, 2009, 93 (8), 1366-1376.
[5] Min Ma, Xiaodong Wang*, Preparation, microstructure and properties of epoxy-based composites containing carbon nanotubes and PMN-PZT piezoceramics as rigid piezo-damping materials, Materials Chemistry and Physics, 2009, 116 (1), 191-197.
[6] Ran Liu, Xiaodong Wang*, Synthesis, characterization, thermal properties and flame retardancy of a novel nonflammable phosphazene-based epoxy resin, Polymer Degradation and Stability, 2009, 94 (4), 617-624.
[7] Huanzhi Zhang, Xiaodong Wang*, Fabrication and performances of microencapsulated phase change materials based on noctadecane core and resorcinol-modified melamine-formaldehyde shell, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2009, 332 (2-3), 129-138.
[8] Changyong Gong, Huanzhi Zhang, Xiaodong Wang*, Effect of Shell Materials on Microstructure and Properties of Microencapsulated n-Octadecane, Iranian Polymer Journal, 2009, 18(6), 501-512.
[9] Huanzhi Zhang, Xiaodong Wang*, Self-assembly and confinement behaviors of poly(ethylene glycol) distearate within lamellar mesostructured silica, Journal of Non-Crystalline Solids, 2008, 354 (45-46), 5068-5073.
[10] Huanzhi Zhang, Zhengwei Jin, Xiaodong Wang*, A new synthesis of lamellar-mesostructured silica by using poly(ethylene glycol) distearate as template, Materials Research Bulletin, 2008, 43 (11), 2979-2985.
[11] Sheng Tian, Fangjin Cui, Xiaodong Wang*, New type of piezo-damping epoxy-matrix composites with multi-walled carbon nanotubes and lead zirconate titanate, Materials Letters, 2008, 62 (23), 3859-3861.
[12] Sheng Tian, Xiaodong Wang*, Fabrication and performances of epoxy/multi-walled carbon nanotubes/piezoelectric ceramic composites as rigid piezo-damping materials, Journal of Materials Science, 2008, 43 (14), 4979-4987.
[13] Jingjing Lin, Xiaodong Wang*, New type of low-dielectric composites based on o-cresol novolac epoxy resin and mesoporous silicas: Fabrication and performances, Journal of Materials Science, 2008, 43 (13), 4455-4465.
[14] Jingjing Lin, Xiaodong Wang*, Preparation, microstructure, and properties of novel low-κ brominated epoxy/mesoporous silica composites, European Polymer Journal, 2008, 44 (5), 1414-1427.
[15] Zhengwei Jin, Xiaodong Wang*, Xiuguo Cui, Synthesis and morphological investigation of ordered SBA-15-type mesoporous silica with an amphiphilic triblock copolymer template under various conditions, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2008, 316 (1-3), 27-36.
[16] Zhengwei Jin, Xiaodong Wang*, Xiuguo Cui, A two-step synthesis of well-ordered cubic mesoporous silica materials under mildly acidic conditions, Microporous and Mesoporous Materials, 2008, 108 (1-3), 183-192.
[17] Zhengwei Jin, Xiaodong Wang*, Xiuguo Cui, Acidity-dependent mesostructure transformation of highly ordered mesoporous silica materials during a two-step synthesis, Journal of Non-Crystalline Solids, 2007, 353 (26), 2507-2514.
[18] Zhengwei Jin, Xiaodong Wang*, Xiuguo Cui, A two-step route to synthesis of small-pored and thick-walled SBA-16-type mesoporous silica under mildly acidic conditions, Journal of Colloid and Interface Science, 2007, 307 (1), 158-165.
[19] Jingjing Lin, Xiaodong Wang*, Novel low-κ polyimide/mesoporous silica composite films: Preparation, microstructure, and properties, Polymer, 2007, 48 (1), 318-329.
[20] Zhengwei Jin, Xiaodong Wang*, Xiuguo Cui, Synthesis and characterization of ordered and cubic mesoporous silica crystals under a moderately acidic condition, Journal of Materials Science, 2007, 42 (2), 465-471.
[21] Lei Wu, Xin Luo, Xiaodong Wang*, Influence of processing conditions on dual-phase continuous blend system of thermoplastic polyurethane with ethylene-propylene-diene monomer elastomer, Journal of Applied Polymer Science, 2006, 102 (6), pp. 5472-5482.
[22] Xiuguo Cui, Xiaodong Wang*, Preparation, morphology, and properties of multilamellar barrier materials based on blends of high-density polyethylene and copolyester, Journal of Applied Polymer Science, 2006, 101 (6), 3791-3799.
[23] Xiaodong Wang*, Hangquan Li, Riguang Jin, Synchronous toughening and reinforcing of polypropylene with ultrahigh-molecular-weight polyethylene via melt blending: Mechanical properties, morphology, and rheology, Journal of Applied Polymer Science, 2006, 100 (5), 3498-3509.
[24] Dezhen Wu, Xiaodong Wang*, Riguang Jin, Effect of nylon 6 on fracture behavior and morphology of tough blends of poly(2, 6-dimethyl-1,4-phenylene oxide) and maleated styrene-ethylene-butadiene-styrene block copolymer, Journal of Applied Polymer Science, 2006, 99 (6), 3336-3343.
[25] Xiaodong Wang*, Xiuguo Cui, Effect of ionomers on mechanical properties, morphology, and rheology of polyoxymethylene and its blends with methyl methacrylate-styrene-butadiene copolymer, European Polymer Journal, 2005, 41 (4), 871-880.
[26] Xiaodong Wang*, Jingjing Lin, A phosphate-based epoxy resin for flame retardance: Synthesis, characterization, and cure properties, Colloid and Polymer Science, 2005, 283 (6), 593-603.
[27] Xiaodong Wang*, Xin Luo, Xinfeng Wang, Study on blends of thermoplastic polyurethane and aliphatic polyester: Morphology, rheology, and properties as moisture vapor permeable films, Polymer Testing, 2005, 24 (1), 18-24.
[28] Guojun Wang, Xiaodong Wang*, Riguang Jin, Preparation and properties of novel plastisols based on acrylic core-shell lattices, Colloid and Polymer Science, 2004, 283 (1), 98-106.
[29] Xiaodong Wang*, Xin Luo, A polymer network based on thermoplastic polyurethane and ethylene-propylene-dieneelastomer via melt blending: Morphology, mechanical properties, and rheology, European Polymer Journal, 2004, 40 (10), 2391-2399.
[30] Xiaodong Wang*, Qiang Zhang, Effect of hydrotalcite on the thermal stability, mechanical properties, rheology and flame retardance of poly(vinyl chloride), Polymer International, 2004, 53 (6), 698-707.
[31] Dezhen Wu, Xiaodong Wang*, Riguang Jin, Toughening of poly(2,6-dimethyl-1,4-phenylene oxide)/nylon 6 alloys with functionalized elastomers via reactive compatibilization: Morphology, mechanical properties, and rheology, European Polymer Journal, 2004, 40 (6), 1223-1232.
[32] Dezhen Wu, Xiaodong Wang*, Yongzhi Song, Riguang Jin, Nanocomposites of Poly(vinyl chloride) and Nanometric Calcium Carbonate Particles: Effects of Chlorinated Polyethylene on Mechanical Properties, Morphology, and Rheology, Journal of Applied Polymer Science, 2004, 92 (4), 2714-2723.
[33] Xiaodong Wang*, Qiang Zhang, Synthesis, characterization, and cure properties of phosphorus-containing epoxy resins for flame retardance, European Polymer Journal, 2004, 40 (2), 385-395.
[34] Xiaodong Wang*, Wei Feng, Hangquan Li, Riguang Jin, Compatibilization and toughening of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 alloy with poly(ethylene 1-octene): Mechanical properties, morphology, and rheology, Journal of Applied Polymer Science, 2003, 88 (14), 3110-3116.
[35] Xiaodong Wang, Wei Feng, Hangquan Li, Eli Ruckenstein*, Optimum toughening via a bicontinuous blending: Toughening of PPO with SEBS and SEBS-gmaleic anhydride, Polymer, 2002, 43 (1), 37-43.
[36] Xiaodong Wang, Hangquan Li, Eli Ruckenstein*, Cooperative toughening and cooperative compatibilization: The nylon 6/ethylene-co-vinyl acetate/ethylene-co-acrylic acid blends, Polymer, 2001, 42 (22), 9211-9216.
[37] Xiaodong Wang*, Hangquan Li, Compatibilizing effect of ethylene-vinyl acetate-acrylic acid copolymer on nylon 6/ethylene-vinyl acetate copolymer blended system: Mechanical properties, morphology and rheology, Journal of Materials Science, 2001, 36 (22), 5465-5473.
[38] Xiaodong Wang, Hangquan Li*, Compatibilizing Effect of Diglycidyl Ether of Bisphenol-A in Polymer Blend System: Nylon 6 Combined with Poly(butyl acrylate) Core and Poly(methyl methacrylate) Shell Particles, Journal of Applied Polymer Science, 2000, 77 (1), 24-29.