本評論只代表中國聚合物網網友個人觀點，不代表中國聚合物網觀點
所有評論:
4 Conclusions
Pulsed radio-frequency glow discharge plasma was used to enhance the adhesion of UHMPE with the matrix epoxy
resin cured by triethylene tetramine and the following conclusions were obtained.
The UHMPE fibers can achieve better modification effect at thumbnail time (5s). With the moderate flow ratio of
He/O2 (200:1), the interfacial shear strength can be increased by 3.2 times and the tensile strength is only decreased by
1.45%. As shown in SEM, many micro-cracks were introduced on the treated sample surface. Oxygen-containing
functional groups such as hydroxyl group and -COO groups centered at about 3410 and 1645cm?1 were also produced on
the fiber surfaces. The polarizing groups and the featured micro-cracks on the fiber surface caused by the plasma
treatment lead to the increase of wettability of the fiber surface so as to improve the surface adhesion properties. And this
high efficient pulsed RF plasma treatment could have great application in scale up industry line.
免責聲明：本站部分資源由網友推薦，來自互聯(lián)網，版權屬于原版權人，如果不慎侵犯到您的權利，敬請告知，我們會在第一時間撤除。本站中各網友的評論
只代表其個人觀點，不代表本站同意其觀點。
